District of Columbia
Chevy Chase DC, DC Remodeling Contractor for Kitchens, Bathrooms, Basements and Additions
Virginia Pro Remodel is a local remodeling contractor and general contractor serving Chevy Chase DC homeowners who want a better layout, updated kitchens and bathrooms, or more usable living space. We handle planning, material selection, DC Department of Buildings and DC Historic Preservation Office / Chevy Chase Historic District review requirements permitting and construction with one accountable team.
Local experience
Local remodeling contractor serving Chevy Chase DC and nearby areas
Chevy Chase DC is one of the communities Virginia Pro Remodel works in most often. Housing here dates mostly from the 1900s–1930s, and Colonial Revival singles, Tudor-style homes and brick bungalows make up the bulk of what we are asked to update. As in much of the area, portions of the neighborhood fall within the Chevy Chase Historic District, which affects exterior and addition design.
We handle the full range of remodeling work in Chevy Chase DC: kitchens, bathrooms, basements, additions and smaller interior projects. Every project is scoped on site, and permitting is coordinated with District of Columbia directly so the paperwork does not become the bottleneck.
Nearby communities we also serve include Tenleytown, Northwest Washington, Chevy Chase (MD) and The Palisades. If your project spans more than one of these areas, or you are not sure which jurisdiction your address falls under, we confirm that for you before the estimate is finalized.
Common home styles
- Colonial Revival singles
- Tudor-style homes
- brick bungalows
Kitchen remodeling in Chevy Chase DC, DC
Most Chevy Chase DC kitchens we open up were laid out for a different way of cooking and living. We reset the layout, plan cabinetry and storage around how you actually use the room, and coordinate the electrical, plumbing and lighting changes a new plan requires — including load-bearing wall removal when opening to the dining or living area is the right move.
Explore kitchen remodeling servicesBathroom remodeling in Chevy Chase DC, DC
Primary and hall bathroom remodels in Chevy Chase DC usually come down to waterproofing done correctly, a shower that fits the space, better ventilation and storage that works for the people using it. We rebuild from the substrate out rather than resurfacing over existing problems.
See how we approach bathroom renovationsBasement remodeling and finishing in Chevy Chase DC
Finishing a basement in Chevy Chase DC starts with moisture, ceiling height and egress, not finishes. Once those are addressed, we plan bedrooms and guest suites, full baths, bars and entertainment areas, offices and gyms — and confirm egress requirements with DC Department of Buildings and DC Historic Preservation Office / Chevy Chase Historic District review requirements before framing.
Learn about basement finishingHome additions and structural remodeling in Chevy Chase DC
Additions and structural remodeling in Chevy Chase DC depend on your lot, setbacks and existing structure. We work through feasibility first, then architectural and engineered drawings, then construction: room additions, primary suites, kitchen bump-outs, sunrooms and second stories.
Read about our home additionsCommon remodeling considerations for Chevy Chase DC homes
Chevy Chase DC housing stock leans toward Colonial Revival singles, Tudor-style homes, brick bungalows. That shapes the work: original framing spans, older electrical service, undersized returns and dated plumbing all affect what a remodel involves before a single finish is chosen. Townhome and condo projects add association review, elevator or parking logistics and stricter work hours, and homes on larger lots may involve septic, well or setback questions.
Remodeling colonial revival singles
We survey structure, systems and existing finishes on site so the scope reflects your home rather than a typical colonial revival single.
Remodeling tudor-style homes
We survey structure, systems and existing finishes on site so the scope reflects your home rather than a typical tudor-style home.
Remodeling brick bungalows
We survey structure, systems and existing finishes on site so the scope reflects your home rather than a typical brick bungalow.
Remodeling permits in District of Columbia
Remodeling work in Chevy Chase DC is permitted through the DC Department of Buildings and DC Historic Preservation Office / Chevy Chase Historic District review requirements. We prepare and submit the permit package, post the approvals on site and schedule the required inspections as part of the project — you are not standing in line for paperwork. Current fees, plan-review turnaround and submittal formats change, so we confirm them with the office for your specific scope before the schedule is set.
Learn which permits a remodel needsBuilding permits
Required for structural work, wall removal, new framing, egress changes and most additions.
Electrical permits
Triggered by new circuits, panel work, recessed lighting layouts and relocating outlets or switches.
Plumbing permits
Needed when supply or drain lines move, which is common in kitchen island sinks, basement baths and shower relocations.
Structural engineering requirements
Load-bearing wall removal, beam sizing and new footings generally require stamped drawings from a licensed engineer.
Permit inspection stages
Typical sequence runs framing and rough-in, insulation, then final inspection before the space is signed off.
Recent remodeling projects near Chevy Chase DC
Our remodeling process, step by step
Every Chevy Chase DC project runs through the same five stages, which is what keeps design decisions, pricing and construction from drifting apart.
Step 1
Consultation and site review
We walk the space, talk through goals and outline a realistic scope and budget range.
Step 2
Design and selections
Drawings, layout options and material allowances so decisions are made before demolition.
Step 3
Estimating and contract
A line-item proposal tied to the drawings, with allowances stated in writing.
Step 4
Permitting
We assemble the submittal, answer plan-review comments and schedule inspections.
Step 5
Construction and closeout
One project manager, a posted schedule, and a punch walk before final payment.
How much does remodeling cost in Chevy Chase DC?
Cost in Chevy Chase DC is driven by scope rather than square footage alone. The factors that move a budget most are whether walls or structure change, how far plumbing and electrical have to move, cabinetry and tile selections, the condition of what is behind the finishes, and permit and engineering requirements in District of Columbia. Access matters too: townhomes, condos and homes on tight lots cost more to stage and protect.
We do not publish a single price for a remodel, because a number without a scope is not useful. After the site visit you get a line-item proposal with allowances stated in writing.
Plan your budget
Our budgeting guide walks through allowances, contingency and where costs typically shift mid-project.
Read the remodeling budget guideWhy Chevy Chase DC homeowners choose Virginia Pro Remodel
One accountable team
Design, estimating, permitting and construction sit under one contract, so nobody is handing your project between firms.
Local permitting knowledge
We submit through the DC Department of Buildings and DC Historic Preservation Office / Chevy Chase Historic District review requirements regularly and plan the schedule around review and inspection stages.
Familiar with Chevy Chase DC homes
Colonial Revival singles, Tudor-style homes, brick bungalows each bring their own structural and systems surprises. We scope for them instead of discovering them.
Bathroom Remodeling
Primary bathrooms, guest bathrooms, walk-in showers, freestanding tubs, tile, vanities and custom storage.
Kitchen Remodeling
Custom kitchen layouts, cabinetry, countertops, lighting, flooring, plumbing and open-concept transformations.
Home Additions
Room additions, sunrooms, bump-outs, expanded kitchens, primary suites and additional living areas.
General Contracting
One contractor for measurements, planning, material selection, engineering, permits, construction and project management.